The Complete Super Cropping Guide

The Complete Super Cropping Guide

Looking for a training technique to increase your yield without having to cultivate more cannabis plants? Introducing super cropping, the cannabis training method that will turn a light output into a Hulked-out crop.

Super cropping is a brutally efficient hands-on, high-stress training technique. This excellent super cropping guide will equip you with the knowledge and abilities necessary to use the method effectively.

The techniques you can learn are selective leaf pruning, branch and node pruning, topping and training, and snapping and twisting. This post will give you the know-how about super cropping and the techniques used to do the process. Before picking up your cannabis seeds, make sure you have all your techniques in place.

What is Super Cropping?

What is Super Cropping

Super Cropping, a high-stress training approach, is essential to get the highest results even though it temporarily harms the cannabis plant. Only the inner cell walls are broken and repaired; the exterior section is left unaffected. The possible outcomes include bushier plants that are enlarged in length and thickness.

It is a method where a predetermined stress level is applied to the female marijuana plant using very mild pressure that slightly harms the tissues. By hypercropping plants, the plant has increased heavier yields. It develops more buds, becomes bushier, and has the potential to produce more THC than usual.

After super cropping, these alterations take place as a result of the plant’s innate defense mechanisms. Supercropping offers marijuana growers a significant advantage because it allows them to generate larger harvests with more branches and potent buds, leaves, and flowers.

Pros and Cons of Super Cropping

Super cropping has mostly positive results, but there is a possibility it can go wrong. Here is a brief list of its pros and cons.

Pros Cons
Most weed cropping techniques are accessible, and there’s no need to get into the difficult things. There is a risk of a plant infection
Minimal equipment is required Super cropping mistakes are costly
Plant height is limited There is significant recovery time needed
The yields produced are more extensive and potent  

 

What Do You Need for Super Cropping?

What Do You Need for Super Cropping

  • To repair and support any potential outside bit of damage, you only need some grafting or other strong tape.
  • A few auxiliary items, including tie bands.
  • The following details and a healthy dose of common sense will work.
  • You must know the proper methods for stressing plants to super crop. You must take a few easy steps to complete this.

When to Start Super Cropping?

When to Start Super Cropping

An excellent technique to regulate and control your plant structure in advance of an optimal bloom with most of the buds in the optical sweet spot is by super cropping weed plants during late vegetative growth.

To allow your plant enough time to recover before the flowering phase, if you’re new to super cropping weed, try doing it around a week before they bloom. In the first few weeks of bloom, when the plant displays signs of rapid stretching on some of the longer branches, seasoned cannabis cultivators may also super crop.

Four Main Super Cropping Techniques

Four Main Super Cropping Techniques

Selective Leaf Pruning

You can combine pruning and training methods on your highly cropped cannabis to increase its yield and condition. Selective leaf pruning is one pruning method.

Using this method, you’ll need to eliminate extra leaves, and fan leaves crowding your plant and shading vital bud size. However, it’s essential to use this trimming approach only on vigorous, quickly growing marijuana plants.

The interior leaves pointing internally towards the entire canopy can be removed. You only need to pinch the leaf contact and stem using your fingers and pluck it off using an upwards motion.

You have to start this pruning when your plant is thriving. Once the leaves crowd each other, it is time to begin selective leaf pruning.

Branch and Node Pruning

As the plant grows, it produces sucker branches, which suck energy from the plant but deny producing anything useful because they lack strong and direct light.

When you remove some weaker and lower branches, the energy gets diverted to the budding and branching sites high above. Nodes have the same standard applied.

The node begins at the crevice, where the leaf stem meets the main stem and becomes another branch. This means you have a branch with six nodes that have the chance to become branches.

This could drain ample energy, so removing all but the three nodes would be wise. An extreme example would have 15 branches with 15 nodes, meaning 225 total.

Removing three would mean 180 nodes are removed, 80% of the total nodes of the plant. Whatever is left can grow 80% quicker with fewer sites drawing energy from the plant. Before you flip into flowering, ensure to thin out plants like this.

Topping and Training

Topping and Training

This advanced technique increases the number of top colas. Biggest Cannabis Plants has a very tall central apex similar to a Christmas tree. The topping removes this apex and lets lower satellite branches get even light deeper to become main colas.

The explosive growth hormones are sent to the highest tip to outgrow everything around them, to get sample light penetration. Once this happens, one central branch gets all the good light, and your satellite branches obtain additional energy.

After this, your apex tip will regrow as two tops. The secondary branches will catch up and give you an equal and nice horizontal canopy. Most do this once, but you can do it many times, increasing the branch tips every time.

For maximizing yields, take these branches, slowly twist and massage them while bending, and weave the branch through the trellis. After securing, the nodes will stand up.

The nodes will become tops and grow at the same height. Scroggins gives the advantage of maximizing your space, letting you take various height branches and create a super-efficient level canopy.

Snapping and Twisting

This is the core of the super cropping weed techniques. It’s a bit difficult but has the most profound effect on the plant. Your cannabis is made of these layers:

  • The skin that is seen after removing the outer hurd
  • The hurd is a mass of fibrous fibers
  • The interior void

Grasp a branch firmly using your hands and twist in opposite directions till you hear a snap. This will break the internal hurd and leave the external layer intact.

In the next 24 hours, the plant fixes itself, and a knuckle would appear where it got wounded throughout the days. The repair process is laborious, which is why this is also called the Kushman Chiropractor.

Later, the plants pass water and nutrients from one cell to another. The knuckle enables the cell to widen to the highway. There is broader nutrient uptake in the wider highway. You need a week to see results when you do this to every stem.

In the end, you are left with a robust plant with a superhighway of cells. You can begin with the foot-tall plant and continue flowering.

Your plant will be more complex than usual and might not need additional support, regardless of how big your bud development is. Your yields will rise with a wider cell-to-cell highway and better plant absorption of water and nutrients. The amount of traffic will increase as the route becomes wider.

The Super Cropping Guide

The Super Cropping Guide

Choose Branches

Super cropping weed is best during the vegetative stage before they begin blooming. Ensure that the old branches are green and pliable before super cropping. Super cropping cannabis can be challenging for beginners, and badly broken branches can increase the potential for disease. The goal here remains to create a flat canopy.

Bend Branches

Super cropping damages the plant’s inner tissue without affecting the outer layer. This enables the stem pliable to bend in any direction. To get this flexibility:

  • Grab the limb by the ends and tightly squeeze the area you want to bend with your thumb and forefinger.
  • Twist the branch between your fingers slowly for around five seconds.
  • Keep turning it until the stem’s interior feels smooth. Now it ought to be flexible and loose.
  • Secure the stem by gradually bending it in.

Tape Up Any Slits in Branches if Needed

Mistakes occur during super cropping, which leads to tears in the outer skin. Fortunately, there are little things duct tape cannot fix.

After cropping a section, quickly check on the branch to ensure there are no tears or open cracks on the skin. Add duct tape to support the offshoot if you break the outer layer. Secure the stem in place if the cracks or tears are visible.

  • Be firm but cautious.
  • Although the branches are flexible, everything has a breaking point.
  • Spend some time learning how far you can bend branches before they break.

Remove Tape After One Week or When the Plant Has Healed

You should remove any bandages after seven days of super cropping your complete plant. If the joint remains wounded, add a new application and leave it on for a couple of days until a protective knuckle is formed.

Your cannabis will maintain the actual process of transporting nutrients if the duct tape strengthens the stem. You can use a Low-Stress Training technique to tie down your plant if it tries to straighten out cropped branches.

After using the super crop method to train your cannabis crop, it’s time to sit back and watch the flower development. You’ll be amazed by how much mass super-cropped cannabis plants produce, so make sure to add extra support alongside the thick healthy branches.

If you are looking for cannabis seeds to start this unique process and its various techniques such as watering cannabis, then head to United Cannabis Seeds and check out the various kinds we have. Super-cropping will be much more fun when you know exactly what mature plant you’re looking for.

Enjoy the results

We hope that this complete guide has provided you with the information and powerful tools you need to successfully practice super cropping. With patience, dedication, and a watchful eye on your plants, you will soon reap the rewards of better yields from larger buds! Don’t forget to monitor your plant’s progress at each step so that you can identify any potential issues quickly and adjust accordingly. Thanks for reading and happy growing!

 

 

Shopping Cart
Scroll to Top